When a wind turbine does not produce enough electricity how does the power company compensate for the loss?












1












$begingroup$


I heard once that when a wind turbine power plant doesn't produce enough electricity the power company's are sometimes forced to turn on a couple of jet engines in order to compensate for the loss, is there any truth to that? I imagine stability is a key factor in keeping the production static and efficient, so what would the power company do?










share|improve this question







New contributor




Rob is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.







$endgroup$












  • $begingroup$
    Small gas fueled and oil fueled generating stations that can be quickly started and stopped would have to exist even if wind turbines had never been invented. They're needed to match the on-line generating capacity to the demand for electric power (see answers below, and the demand can change just as quickly as the wind can change.
    $endgroup$
    – Solomon Slow
    22 secs ago
















1












$begingroup$


I heard once that when a wind turbine power plant doesn't produce enough electricity the power company's are sometimes forced to turn on a couple of jet engines in order to compensate for the loss, is there any truth to that? I imagine stability is a key factor in keeping the production static and efficient, so what would the power company do?










share|improve this question







New contributor




Rob is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.







$endgroup$












  • $begingroup$
    Small gas fueled and oil fueled generating stations that can be quickly started and stopped would have to exist even if wind turbines had never been invented. They're needed to match the on-line generating capacity to the demand for electric power (see answers below, and the demand can change just as quickly as the wind can change.
    $endgroup$
    – Solomon Slow
    22 secs ago














1












1








1


1



$begingroup$


I heard once that when a wind turbine power plant doesn't produce enough electricity the power company's are sometimes forced to turn on a couple of jet engines in order to compensate for the loss, is there any truth to that? I imagine stability is a key factor in keeping the production static and efficient, so what would the power company do?










share|improve this question







New contributor




Rob is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.







$endgroup$




I heard once that when a wind turbine power plant doesn't produce enough electricity the power company's are sometimes forced to turn on a couple of jet engines in order to compensate for the loss, is there any truth to that? I imagine stability is a key factor in keeping the production static and efficient, so what would the power company do?







power-engineering power-grid






share|improve this question







New contributor




Rob is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











share|improve this question







New contributor




Rob is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









share|improve this question




share|improve this question






New contributor




Rob is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









asked 47 mins ago









RobRob

1092




1092




New contributor




Rob is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.





New contributor





Rob is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.






Rob is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.












  • $begingroup$
    Small gas fueled and oil fueled generating stations that can be quickly started and stopped would have to exist even if wind turbines had never been invented. They're needed to match the on-line generating capacity to the demand for electric power (see answers below, and the demand can change just as quickly as the wind can change.
    $endgroup$
    – Solomon Slow
    22 secs ago


















  • $begingroup$
    Small gas fueled and oil fueled generating stations that can be quickly started and stopped would have to exist even if wind turbines had never been invented. They're needed to match the on-line generating capacity to the demand for electric power (see answers below, and the demand can change just as quickly as the wind can change.
    $endgroup$
    – Solomon Slow
    22 secs ago
















$begingroup$
Small gas fueled and oil fueled generating stations that can be quickly started and stopped would have to exist even if wind turbines had never been invented. They're needed to match the on-line generating capacity to the demand for electric power (see answers below, and the demand can change just as quickly as the wind can change.
$endgroup$
– Solomon Slow
22 secs ago




$begingroup$
Small gas fueled and oil fueled generating stations that can be quickly started and stopped would have to exist even if wind turbines had never been invented. They're needed to match the on-line generating capacity to the demand for electric power (see answers below, and the demand can change just as quickly as the wind can change.
$endgroup$
– Solomon Slow
22 secs ago










2 Answers
2






active

oldest

votes


















3












$begingroup$

This is correct. When the demand exceeds supply, voltage will sag and frequency will drop (which can risk equipment failure and is certainly an undesirable situation). The operators of power grids will turn on alternative sources of generation in order to correct the imbalance as soon as it is noticed (often under the coordination of a regional transmission organization such as CAISO).



Grid operators are very careful to ensure that the grid frequency is properly maintained (source); even a few seconds of drift (i.e. a few hundred cycles ahead or behind) require RTOs and related agencies to take corrective action where safe.



In order to understand the mix of energy a bit more thoroughly, it's necessary to take into account the types of generation, which include base-load plants, load-following plants, intermittent sources, and peaker plants:




  • Base-load plants are designed to operate at high cost efficiency (not necessarily environmental efficiency or any other measure of efficiency, unless dictated by local laws and priorities), but cannot be adjusted quickly. Examples of these may include large coal and nuclear base load.

  • Load-following plants can adjust if they have capacity (e.g. hydroelectric or smaller fuel-burning plants)

  • Peaker plants are agile and can be brought online quickly (e.g. gas turbines), but are inefficient. When the base-load plants are insufficient, load-following plants increase their load; if this capacity is exhausted or the grid is experiencing rapid swings in load that the load-following plants cannot keep up with, then peakers will come online and begin burning fuel to achieve enough supply to balance the demand.


Another factor to consider is planning: If an area has consistent winds and enough wind turbines, the wind can be considered part of base-load: It cannot be adjusted, but is relatively predictable and consistent day-to-day. Gaps in the wind are treated the same way as any other shortfall of base-load: first via load-following plants if possible and then with the help of the peakers.



Known gaps and shortfalls can also be handled through trading. For example, Washington State, US has abundant hydroelectric power, and exports energy to fourteen other states. Its overproduction of energy (which can itself be as harmful as underproduction) is usefully diverted to help make up some of the supply of neighboring states such as California (source). This export includes base-load if the local demand is dropping too quickly for the operating power plants to adjust.



Stored energy also makes a contribution. The sources for such extra energy may be storage sites such as pumped energy storage, batteries (e.g. this), or they may be generation (not necessarily burning fuel).



Lastly, load-shedding is a last-resort. If conditions are adverse (very high demand such as air-conditioning on a hot day, transmission line failures, loss of base-load, etc) then the grid operator may increase the real-time price of industrial energy, or even require that industrial grid users curtail their demand to avoid grid instability. If this is insufficient then blackouts and brownouts will occur, to prevent the total loss of the grid and its most critical users (hospitals, emergency services, communications).






share|improve this answer











$endgroup$













  • $begingroup$
    That's all fairly accurate except I don't think coal is very efficient. Wind generation doesn't really count for much in the big picture yet. The NG gas turbines are expensive to operate but can load balance very quickly. Base line plant adjust so slowly that when demand drops too quickly electrity has to be dumped elsewhere. Which means selling it at significantly less then the cost of producing it. I know that our price in Canada changes with the American dollar. Excess power goes back and forth across the border and makes a mess of the price. The whole grid is interconnected.
    $endgroup$
    – Joe Fala
    23 mins ago










  • $begingroup$
    @JoeFala Coal is not efficient relative to its environmental effect, but it is efficient relative to its financial cost in many parts of the world, to the best of my knowledge.
    $endgroup$
    – Andrey Akhmetov
    22 mins ago










  • $begingroup$
    Oh yeah it's cheap but from a combustion efficiency point of view I don't think it's very good. I believe that many of the plants are being upgraded but because the cost is still low enough it not financially sustainable to run the higher efficiency plants. I haven't brushed up on this for several years, so I'm not familiar with the current technology. I'm pretty sure nuclear is the cheapest to run and the cleanest overall but expensive to set up and people are terrified of it. Nuclear is actually cleaner then solar panels if you factor in the production of the material in the panels.
    $endgroup$
    – Joe Fala
    16 mins ago










  • $begingroup$
    J-Power's unit 2 ultrasupercritical(mouthfull) in Japan has 45% efficiency which is pretty damn good. Nuclear power is is like 55% I think more of those ultrasupercritical plants are coming online soon.
    $endgroup$
    – Joe Fala
    9 mins ago












  • $begingroup$
    @JoeFala I've edited the answer to mention cost-efficiency in particular to avoid any confusion. Thank you for letting me know about the imprecise wording.
    $endgroup$
    – Andrey Akhmetov
    7 mins ago





















2












$begingroup$

I was going to scold you for not doing a search -- then couldn't find a decent answer! So -- here's a short answer:



First, jet engines -- no. You're thinking of gas turbines, but they are not jet engines (try a web search on "Gas Turbine").



Second, there's not a lot of energy storage on the electrical grid, aside from tanks of gas, piles of coal, uranium rods, and water behind dams. Batteries are starting to look like maybe they'll be practical, eventually. But by and large, when "alternative" energy sources poop out, there needs to be a "traditional" energy source that kicks in. Gas turbines are good for this because they can be brought on line quickly.



This wiki article goes into the grid storage issue.






share|improve this answer









$endgroup$













    Your Answer





    StackExchange.ifUsing("editor", function () {
    return StackExchange.using("mathjaxEditing", function () {
    StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
    StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["\$", "\$"]]);
    });
    });
    }, "mathjax-editing");

    StackExchange.ifUsing("editor", function () {
    return StackExchange.using("schematics", function () {
    StackExchange.schematics.init();
    });
    }, "cicuitlab");

    StackExchange.ready(function() {
    var channelOptions = {
    tags: "".split(" "),
    id: "135"
    };
    initTagRenderer("".split(" "), "".split(" "), channelOptions);

    StackExchange.using("externalEditor", function() {
    // Have to fire editor after snippets, if snippets enabled
    if (StackExchange.settings.snippets.snippetsEnabled) {
    StackExchange.using("snippets", function() {
    createEditor();
    });
    }
    else {
    createEditor();
    }
    });

    function createEditor() {
    StackExchange.prepareEditor({
    heartbeatType: 'answer',
    autoActivateHeartbeat: false,
    convertImagesToLinks: false,
    noModals: true,
    showLowRepImageUploadWarning: true,
    reputationToPostImages: null,
    bindNavPrevention: true,
    postfix: "",
    imageUploader: {
    brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
    contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
    allowUrls: true
    },
    onDemand: true,
    discardSelector: ".discard-answer"
    ,immediatelyShowMarkdownHelp:true
    });


    }
    });






    Rob is a new contributor. Be nice, and check out our Code of Conduct.










    draft saved

    draft discarded


















    StackExchange.ready(
    function () {
    StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f426616%2fwhen-a-wind-turbine-does-not-produce-enough-electricity-how-does-the-power-compa%23new-answer', 'question_page');
    }
    );

    Post as a guest















    Required, but never shown

























    2 Answers
    2






    active

    oldest

    votes








    2 Answers
    2






    active

    oldest

    votes









    active

    oldest

    votes






    active

    oldest

    votes









    3












    $begingroup$

    This is correct. When the demand exceeds supply, voltage will sag and frequency will drop (which can risk equipment failure and is certainly an undesirable situation). The operators of power grids will turn on alternative sources of generation in order to correct the imbalance as soon as it is noticed (often under the coordination of a regional transmission organization such as CAISO).



    Grid operators are very careful to ensure that the grid frequency is properly maintained (source); even a few seconds of drift (i.e. a few hundred cycles ahead or behind) require RTOs and related agencies to take corrective action where safe.



    In order to understand the mix of energy a bit more thoroughly, it's necessary to take into account the types of generation, which include base-load plants, load-following plants, intermittent sources, and peaker plants:




    • Base-load plants are designed to operate at high cost efficiency (not necessarily environmental efficiency or any other measure of efficiency, unless dictated by local laws and priorities), but cannot be adjusted quickly. Examples of these may include large coal and nuclear base load.

    • Load-following plants can adjust if they have capacity (e.g. hydroelectric or smaller fuel-burning plants)

    • Peaker plants are agile and can be brought online quickly (e.g. gas turbines), but are inefficient. When the base-load plants are insufficient, load-following plants increase their load; if this capacity is exhausted or the grid is experiencing rapid swings in load that the load-following plants cannot keep up with, then peakers will come online and begin burning fuel to achieve enough supply to balance the demand.


    Another factor to consider is planning: If an area has consistent winds and enough wind turbines, the wind can be considered part of base-load: It cannot be adjusted, but is relatively predictable and consistent day-to-day. Gaps in the wind are treated the same way as any other shortfall of base-load: first via load-following plants if possible and then with the help of the peakers.



    Known gaps and shortfalls can also be handled through trading. For example, Washington State, US has abundant hydroelectric power, and exports energy to fourteen other states. Its overproduction of energy (which can itself be as harmful as underproduction) is usefully diverted to help make up some of the supply of neighboring states such as California (source). This export includes base-load if the local demand is dropping too quickly for the operating power plants to adjust.



    Stored energy also makes a contribution. The sources for such extra energy may be storage sites such as pumped energy storage, batteries (e.g. this), or they may be generation (not necessarily burning fuel).



    Lastly, load-shedding is a last-resort. If conditions are adverse (very high demand such as air-conditioning on a hot day, transmission line failures, loss of base-load, etc) then the grid operator may increase the real-time price of industrial energy, or even require that industrial grid users curtail their demand to avoid grid instability. If this is insufficient then blackouts and brownouts will occur, to prevent the total loss of the grid and its most critical users (hospitals, emergency services, communications).






    share|improve this answer











    $endgroup$













    • $begingroup$
      That's all fairly accurate except I don't think coal is very efficient. Wind generation doesn't really count for much in the big picture yet. The NG gas turbines are expensive to operate but can load balance very quickly. Base line plant adjust so slowly that when demand drops too quickly electrity has to be dumped elsewhere. Which means selling it at significantly less then the cost of producing it. I know that our price in Canada changes with the American dollar. Excess power goes back and forth across the border and makes a mess of the price. The whole grid is interconnected.
      $endgroup$
      – Joe Fala
      23 mins ago










    • $begingroup$
      @JoeFala Coal is not efficient relative to its environmental effect, but it is efficient relative to its financial cost in many parts of the world, to the best of my knowledge.
      $endgroup$
      – Andrey Akhmetov
      22 mins ago










    • $begingroup$
      Oh yeah it's cheap but from a combustion efficiency point of view I don't think it's very good. I believe that many of the plants are being upgraded but because the cost is still low enough it not financially sustainable to run the higher efficiency plants. I haven't brushed up on this for several years, so I'm not familiar with the current technology. I'm pretty sure nuclear is the cheapest to run and the cleanest overall but expensive to set up and people are terrified of it. Nuclear is actually cleaner then solar panels if you factor in the production of the material in the panels.
      $endgroup$
      – Joe Fala
      16 mins ago










    • $begingroup$
      J-Power's unit 2 ultrasupercritical(mouthfull) in Japan has 45% efficiency which is pretty damn good. Nuclear power is is like 55% I think more of those ultrasupercritical plants are coming online soon.
      $endgroup$
      – Joe Fala
      9 mins ago












    • $begingroup$
      @JoeFala I've edited the answer to mention cost-efficiency in particular to avoid any confusion. Thank you for letting me know about the imprecise wording.
      $endgroup$
      – Andrey Akhmetov
      7 mins ago


















    3












    $begingroup$

    This is correct. When the demand exceeds supply, voltage will sag and frequency will drop (which can risk equipment failure and is certainly an undesirable situation). The operators of power grids will turn on alternative sources of generation in order to correct the imbalance as soon as it is noticed (often under the coordination of a regional transmission organization such as CAISO).



    Grid operators are very careful to ensure that the grid frequency is properly maintained (source); even a few seconds of drift (i.e. a few hundred cycles ahead or behind) require RTOs and related agencies to take corrective action where safe.



    In order to understand the mix of energy a bit more thoroughly, it's necessary to take into account the types of generation, which include base-load plants, load-following plants, intermittent sources, and peaker plants:




    • Base-load plants are designed to operate at high cost efficiency (not necessarily environmental efficiency or any other measure of efficiency, unless dictated by local laws and priorities), but cannot be adjusted quickly. Examples of these may include large coal and nuclear base load.

    • Load-following plants can adjust if they have capacity (e.g. hydroelectric or smaller fuel-burning plants)

    • Peaker plants are agile and can be brought online quickly (e.g. gas turbines), but are inefficient. When the base-load plants are insufficient, load-following plants increase their load; if this capacity is exhausted or the grid is experiencing rapid swings in load that the load-following plants cannot keep up with, then peakers will come online and begin burning fuel to achieve enough supply to balance the demand.


    Another factor to consider is planning: If an area has consistent winds and enough wind turbines, the wind can be considered part of base-load: It cannot be adjusted, but is relatively predictable and consistent day-to-day. Gaps in the wind are treated the same way as any other shortfall of base-load: first via load-following plants if possible and then with the help of the peakers.



    Known gaps and shortfalls can also be handled through trading. For example, Washington State, US has abundant hydroelectric power, and exports energy to fourteen other states. Its overproduction of energy (which can itself be as harmful as underproduction) is usefully diverted to help make up some of the supply of neighboring states such as California (source). This export includes base-load if the local demand is dropping too quickly for the operating power plants to adjust.



    Stored energy also makes a contribution. The sources for such extra energy may be storage sites such as pumped energy storage, batteries (e.g. this), or they may be generation (not necessarily burning fuel).



    Lastly, load-shedding is a last-resort. If conditions are adverse (very high demand such as air-conditioning on a hot day, transmission line failures, loss of base-load, etc) then the grid operator may increase the real-time price of industrial energy, or even require that industrial grid users curtail their demand to avoid grid instability. If this is insufficient then blackouts and brownouts will occur, to prevent the total loss of the grid and its most critical users (hospitals, emergency services, communications).






    share|improve this answer











    $endgroup$













    • $begingroup$
      That's all fairly accurate except I don't think coal is very efficient. Wind generation doesn't really count for much in the big picture yet. The NG gas turbines are expensive to operate but can load balance very quickly. Base line plant adjust so slowly that when demand drops too quickly electrity has to be dumped elsewhere. Which means selling it at significantly less then the cost of producing it. I know that our price in Canada changes with the American dollar. Excess power goes back and forth across the border and makes a mess of the price. The whole grid is interconnected.
      $endgroup$
      – Joe Fala
      23 mins ago










    • $begingroup$
      @JoeFala Coal is not efficient relative to its environmental effect, but it is efficient relative to its financial cost in many parts of the world, to the best of my knowledge.
      $endgroup$
      – Andrey Akhmetov
      22 mins ago










    • $begingroup$
      Oh yeah it's cheap but from a combustion efficiency point of view I don't think it's very good. I believe that many of the plants are being upgraded but because the cost is still low enough it not financially sustainable to run the higher efficiency plants. I haven't brushed up on this for several years, so I'm not familiar with the current technology. I'm pretty sure nuclear is the cheapest to run and the cleanest overall but expensive to set up and people are terrified of it. Nuclear is actually cleaner then solar panels if you factor in the production of the material in the panels.
      $endgroup$
      – Joe Fala
      16 mins ago










    • $begingroup$
      J-Power's unit 2 ultrasupercritical(mouthfull) in Japan has 45% efficiency which is pretty damn good. Nuclear power is is like 55% I think more of those ultrasupercritical plants are coming online soon.
      $endgroup$
      – Joe Fala
      9 mins ago












    • $begingroup$
      @JoeFala I've edited the answer to mention cost-efficiency in particular to avoid any confusion. Thank you for letting me know about the imprecise wording.
      $endgroup$
      – Andrey Akhmetov
      7 mins ago
















    3












    3








    3





    $begingroup$

    This is correct. When the demand exceeds supply, voltage will sag and frequency will drop (which can risk equipment failure and is certainly an undesirable situation). The operators of power grids will turn on alternative sources of generation in order to correct the imbalance as soon as it is noticed (often under the coordination of a regional transmission organization such as CAISO).



    Grid operators are very careful to ensure that the grid frequency is properly maintained (source); even a few seconds of drift (i.e. a few hundred cycles ahead or behind) require RTOs and related agencies to take corrective action where safe.



    In order to understand the mix of energy a bit more thoroughly, it's necessary to take into account the types of generation, which include base-load plants, load-following plants, intermittent sources, and peaker plants:




    • Base-load plants are designed to operate at high cost efficiency (not necessarily environmental efficiency or any other measure of efficiency, unless dictated by local laws and priorities), but cannot be adjusted quickly. Examples of these may include large coal and nuclear base load.

    • Load-following plants can adjust if they have capacity (e.g. hydroelectric or smaller fuel-burning plants)

    • Peaker plants are agile and can be brought online quickly (e.g. gas turbines), but are inefficient. When the base-load plants are insufficient, load-following plants increase their load; if this capacity is exhausted or the grid is experiencing rapid swings in load that the load-following plants cannot keep up with, then peakers will come online and begin burning fuel to achieve enough supply to balance the demand.


    Another factor to consider is planning: If an area has consistent winds and enough wind turbines, the wind can be considered part of base-load: It cannot be adjusted, but is relatively predictable and consistent day-to-day. Gaps in the wind are treated the same way as any other shortfall of base-load: first via load-following plants if possible and then with the help of the peakers.



    Known gaps and shortfalls can also be handled through trading. For example, Washington State, US has abundant hydroelectric power, and exports energy to fourteen other states. Its overproduction of energy (which can itself be as harmful as underproduction) is usefully diverted to help make up some of the supply of neighboring states such as California (source). This export includes base-load if the local demand is dropping too quickly for the operating power plants to adjust.



    Stored energy also makes a contribution. The sources for such extra energy may be storage sites such as pumped energy storage, batteries (e.g. this), or they may be generation (not necessarily burning fuel).



    Lastly, load-shedding is a last-resort. If conditions are adverse (very high demand such as air-conditioning on a hot day, transmission line failures, loss of base-load, etc) then the grid operator may increase the real-time price of industrial energy, or even require that industrial grid users curtail their demand to avoid grid instability. If this is insufficient then blackouts and brownouts will occur, to prevent the total loss of the grid and its most critical users (hospitals, emergency services, communications).






    share|improve this answer











    $endgroup$



    This is correct. When the demand exceeds supply, voltage will sag and frequency will drop (which can risk equipment failure and is certainly an undesirable situation). The operators of power grids will turn on alternative sources of generation in order to correct the imbalance as soon as it is noticed (often under the coordination of a regional transmission organization such as CAISO).



    Grid operators are very careful to ensure that the grid frequency is properly maintained (source); even a few seconds of drift (i.e. a few hundred cycles ahead or behind) require RTOs and related agencies to take corrective action where safe.



    In order to understand the mix of energy a bit more thoroughly, it's necessary to take into account the types of generation, which include base-load plants, load-following plants, intermittent sources, and peaker plants:




    • Base-load plants are designed to operate at high cost efficiency (not necessarily environmental efficiency or any other measure of efficiency, unless dictated by local laws and priorities), but cannot be adjusted quickly. Examples of these may include large coal and nuclear base load.

    • Load-following plants can adjust if they have capacity (e.g. hydroelectric or smaller fuel-burning plants)

    • Peaker plants are agile and can be brought online quickly (e.g. gas turbines), but are inefficient. When the base-load plants are insufficient, load-following plants increase their load; if this capacity is exhausted or the grid is experiencing rapid swings in load that the load-following plants cannot keep up with, then peakers will come online and begin burning fuel to achieve enough supply to balance the demand.


    Another factor to consider is planning: If an area has consistent winds and enough wind turbines, the wind can be considered part of base-load: It cannot be adjusted, but is relatively predictable and consistent day-to-day. Gaps in the wind are treated the same way as any other shortfall of base-load: first via load-following plants if possible and then with the help of the peakers.



    Known gaps and shortfalls can also be handled through trading. For example, Washington State, US has abundant hydroelectric power, and exports energy to fourteen other states. Its overproduction of energy (which can itself be as harmful as underproduction) is usefully diverted to help make up some of the supply of neighboring states such as California (source). This export includes base-load if the local demand is dropping too quickly for the operating power plants to adjust.



    Stored energy also makes a contribution. The sources for such extra energy may be storage sites such as pumped energy storage, batteries (e.g. this), or they may be generation (not necessarily burning fuel).



    Lastly, load-shedding is a last-resort. If conditions are adverse (very high demand such as air-conditioning on a hot day, transmission line failures, loss of base-load, etc) then the grid operator may increase the real-time price of industrial energy, or even require that industrial grid users curtail their demand to avoid grid instability. If this is insufficient then blackouts and brownouts will occur, to prevent the total loss of the grid and its most critical users (hospitals, emergency services, communications).







    share|improve this answer














    share|improve this answer



    share|improve this answer








    edited 7 mins ago

























    answered 38 mins ago









    Andrey AkhmetovAndrey Akhmetov

    1,058722




    1,058722












    • $begingroup$
      That's all fairly accurate except I don't think coal is very efficient. Wind generation doesn't really count for much in the big picture yet. The NG gas turbines are expensive to operate but can load balance very quickly. Base line plant adjust so slowly that when demand drops too quickly electrity has to be dumped elsewhere. Which means selling it at significantly less then the cost of producing it. I know that our price in Canada changes with the American dollar. Excess power goes back and forth across the border and makes a mess of the price. The whole grid is interconnected.
      $endgroup$
      – Joe Fala
      23 mins ago










    • $begingroup$
      @JoeFala Coal is not efficient relative to its environmental effect, but it is efficient relative to its financial cost in many parts of the world, to the best of my knowledge.
      $endgroup$
      – Andrey Akhmetov
      22 mins ago










    • $begingroup$
      Oh yeah it's cheap but from a combustion efficiency point of view I don't think it's very good. I believe that many of the plants are being upgraded but because the cost is still low enough it not financially sustainable to run the higher efficiency plants. I haven't brushed up on this for several years, so I'm not familiar with the current technology. I'm pretty sure nuclear is the cheapest to run and the cleanest overall but expensive to set up and people are terrified of it. Nuclear is actually cleaner then solar panels if you factor in the production of the material in the panels.
      $endgroup$
      – Joe Fala
      16 mins ago










    • $begingroup$
      J-Power's unit 2 ultrasupercritical(mouthfull) in Japan has 45% efficiency which is pretty damn good. Nuclear power is is like 55% I think more of those ultrasupercritical plants are coming online soon.
      $endgroup$
      – Joe Fala
      9 mins ago












    • $begingroup$
      @JoeFala I've edited the answer to mention cost-efficiency in particular to avoid any confusion. Thank you for letting me know about the imprecise wording.
      $endgroup$
      – Andrey Akhmetov
      7 mins ago




















    • $begingroup$
      That's all fairly accurate except I don't think coal is very efficient. Wind generation doesn't really count for much in the big picture yet. The NG gas turbines are expensive to operate but can load balance very quickly. Base line plant adjust so slowly that when demand drops too quickly electrity has to be dumped elsewhere. Which means selling it at significantly less then the cost of producing it. I know that our price in Canada changes with the American dollar. Excess power goes back and forth across the border and makes a mess of the price. The whole grid is interconnected.
      $endgroup$
      – Joe Fala
      23 mins ago










    • $begingroup$
      @JoeFala Coal is not efficient relative to its environmental effect, but it is efficient relative to its financial cost in many parts of the world, to the best of my knowledge.
      $endgroup$
      – Andrey Akhmetov
      22 mins ago










    • $begingroup$
      Oh yeah it's cheap but from a combustion efficiency point of view I don't think it's very good. I believe that many of the plants are being upgraded but because the cost is still low enough it not financially sustainable to run the higher efficiency plants. I haven't brushed up on this for several years, so I'm not familiar with the current technology. I'm pretty sure nuclear is the cheapest to run and the cleanest overall but expensive to set up and people are terrified of it. Nuclear is actually cleaner then solar panels if you factor in the production of the material in the panels.
      $endgroup$
      – Joe Fala
      16 mins ago










    • $begingroup$
      J-Power's unit 2 ultrasupercritical(mouthfull) in Japan has 45% efficiency which is pretty damn good. Nuclear power is is like 55% I think more of those ultrasupercritical plants are coming online soon.
      $endgroup$
      – Joe Fala
      9 mins ago












    • $begingroup$
      @JoeFala I've edited the answer to mention cost-efficiency in particular to avoid any confusion. Thank you for letting me know about the imprecise wording.
      $endgroup$
      – Andrey Akhmetov
      7 mins ago


















    $begingroup$
    That's all fairly accurate except I don't think coal is very efficient. Wind generation doesn't really count for much in the big picture yet. The NG gas turbines are expensive to operate but can load balance very quickly. Base line plant adjust so slowly that when demand drops too quickly electrity has to be dumped elsewhere. Which means selling it at significantly less then the cost of producing it. I know that our price in Canada changes with the American dollar. Excess power goes back and forth across the border and makes a mess of the price. The whole grid is interconnected.
    $endgroup$
    – Joe Fala
    23 mins ago




    $begingroup$
    That's all fairly accurate except I don't think coal is very efficient. Wind generation doesn't really count for much in the big picture yet. The NG gas turbines are expensive to operate but can load balance very quickly. Base line plant adjust so slowly that when demand drops too quickly electrity has to be dumped elsewhere. Which means selling it at significantly less then the cost of producing it. I know that our price in Canada changes with the American dollar. Excess power goes back and forth across the border and makes a mess of the price. The whole grid is interconnected.
    $endgroup$
    – Joe Fala
    23 mins ago












    $begingroup$
    @JoeFala Coal is not efficient relative to its environmental effect, but it is efficient relative to its financial cost in many parts of the world, to the best of my knowledge.
    $endgroup$
    – Andrey Akhmetov
    22 mins ago




    $begingroup$
    @JoeFala Coal is not efficient relative to its environmental effect, but it is efficient relative to its financial cost in many parts of the world, to the best of my knowledge.
    $endgroup$
    – Andrey Akhmetov
    22 mins ago












    $begingroup$
    Oh yeah it's cheap but from a combustion efficiency point of view I don't think it's very good. I believe that many of the plants are being upgraded but because the cost is still low enough it not financially sustainable to run the higher efficiency plants. I haven't brushed up on this for several years, so I'm not familiar with the current technology. I'm pretty sure nuclear is the cheapest to run and the cleanest overall but expensive to set up and people are terrified of it. Nuclear is actually cleaner then solar panels if you factor in the production of the material in the panels.
    $endgroup$
    – Joe Fala
    16 mins ago




    $begingroup$
    Oh yeah it's cheap but from a combustion efficiency point of view I don't think it's very good. I believe that many of the plants are being upgraded but because the cost is still low enough it not financially sustainable to run the higher efficiency plants. I haven't brushed up on this for several years, so I'm not familiar with the current technology. I'm pretty sure nuclear is the cheapest to run and the cleanest overall but expensive to set up and people are terrified of it. Nuclear is actually cleaner then solar panels if you factor in the production of the material in the panels.
    $endgroup$
    – Joe Fala
    16 mins ago












    $begingroup$
    J-Power's unit 2 ultrasupercritical(mouthfull) in Japan has 45% efficiency which is pretty damn good. Nuclear power is is like 55% I think more of those ultrasupercritical plants are coming online soon.
    $endgroup$
    – Joe Fala
    9 mins ago






    $begingroup$
    J-Power's unit 2 ultrasupercritical(mouthfull) in Japan has 45% efficiency which is pretty damn good. Nuclear power is is like 55% I think more of those ultrasupercritical plants are coming online soon.
    $endgroup$
    – Joe Fala
    9 mins ago














    $begingroup$
    @JoeFala I've edited the answer to mention cost-efficiency in particular to avoid any confusion. Thank you for letting me know about the imprecise wording.
    $endgroup$
    – Andrey Akhmetov
    7 mins ago






    $begingroup$
    @JoeFala I've edited the answer to mention cost-efficiency in particular to avoid any confusion. Thank you for letting me know about the imprecise wording.
    $endgroup$
    – Andrey Akhmetov
    7 mins ago















    2












    $begingroup$

    I was going to scold you for not doing a search -- then couldn't find a decent answer! So -- here's a short answer:



    First, jet engines -- no. You're thinking of gas turbines, but they are not jet engines (try a web search on "Gas Turbine").



    Second, there's not a lot of energy storage on the electrical grid, aside from tanks of gas, piles of coal, uranium rods, and water behind dams. Batteries are starting to look like maybe they'll be practical, eventually. But by and large, when "alternative" energy sources poop out, there needs to be a "traditional" energy source that kicks in. Gas turbines are good for this because they can be brought on line quickly.



    This wiki article goes into the grid storage issue.






    share|improve this answer









    $endgroup$


















      2












      $begingroup$

      I was going to scold you for not doing a search -- then couldn't find a decent answer! So -- here's a short answer:



      First, jet engines -- no. You're thinking of gas turbines, but they are not jet engines (try a web search on "Gas Turbine").



      Second, there's not a lot of energy storage on the electrical grid, aside from tanks of gas, piles of coal, uranium rods, and water behind dams. Batteries are starting to look like maybe they'll be practical, eventually. But by and large, when "alternative" energy sources poop out, there needs to be a "traditional" energy source that kicks in. Gas turbines are good for this because they can be brought on line quickly.



      This wiki article goes into the grid storage issue.






      share|improve this answer









      $endgroup$
















        2












        2








        2





        $begingroup$

        I was going to scold you for not doing a search -- then couldn't find a decent answer! So -- here's a short answer:



        First, jet engines -- no. You're thinking of gas turbines, but they are not jet engines (try a web search on "Gas Turbine").



        Second, there's not a lot of energy storage on the electrical grid, aside from tanks of gas, piles of coal, uranium rods, and water behind dams. Batteries are starting to look like maybe they'll be practical, eventually. But by and large, when "alternative" energy sources poop out, there needs to be a "traditional" energy source that kicks in. Gas turbines are good for this because they can be brought on line quickly.



        This wiki article goes into the grid storage issue.






        share|improve this answer









        $endgroup$



        I was going to scold you for not doing a search -- then couldn't find a decent answer! So -- here's a short answer:



        First, jet engines -- no. You're thinking of gas turbines, but they are not jet engines (try a web search on "Gas Turbine").



        Second, there's not a lot of energy storage on the electrical grid, aside from tanks of gas, piles of coal, uranium rods, and water behind dams. Batteries are starting to look like maybe they'll be practical, eventually. But by and large, when "alternative" energy sources poop out, there needs to be a "traditional" energy source that kicks in. Gas turbines are good for this because they can be brought on line quickly.



        This wiki article goes into the grid storage issue.







        share|improve this answer












        share|improve this answer



        share|improve this answer










        answered 39 mins ago









        TimWescottTimWescott

        5,6841414




        5,6841414






















            Rob is a new contributor. Be nice, and check out our Code of Conduct.










            draft saved

            draft discarded


















            Rob is a new contributor. Be nice, and check out our Code of Conduct.













            Rob is a new contributor. Be nice, and check out our Code of Conduct.












            Rob is a new contributor. Be nice, and check out our Code of Conduct.
















            Thanks for contributing an answer to Electrical Engineering Stack Exchange!


            • Please be sure to answer the question. Provide details and share your research!

            But avoid



            • Asking for help, clarification, or responding to other answers.

            • Making statements based on opinion; back them up with references or personal experience.


            Use MathJax to format equations. MathJax reference.


            To learn more, see our tips on writing great answers.




            draft saved


            draft discarded














            StackExchange.ready(
            function () {
            StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f426616%2fwhen-a-wind-turbine-does-not-produce-enough-electricity-how-does-the-power-compa%23new-answer', 'question_page');
            }
            );

            Post as a guest















            Required, but never shown





















































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown

































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown







            Popular posts from this blog

            Statuo de Libereco

            Tanganjiko

            Liste der Baudenkmäler in Enneberg